METABO 18V Brushless 2 Piece 2 x 8.0Ah Combo Kit AU68203180

Includes

• 1 x METABO 18V Brushless 130Nm LTX Hammer Drill Skin 602360850
• 1 x METABO 18V Brushless 1/2inch Impact Wrench Skin 602395890
• 2 x METABO 18V 8.0Ah LIHD Battery Pack 625369000
• 1 x METABO 12-36V Air Cooled Battery Charger ASC55 627047000
• 1 x METABO MetaBOX 165 L

METABO 18V Brushless 130Nm LTX Hammer Drill Skin 602360850

• Brushless hammer drill with maximum power for demanding applications
• Hammer drill function for drilling in masonry
• Selectable "impulse" mode for removal of stubborn screws and for spot-drilling on smooth surfaces
• Precision Stop: electronic torque control with increased precision for precise, delicate working
• Electronic safety shutdown: no kickback if the drill bit stops unexpectedly - for high user safety
• Integrated LED work light with night light function for optimal brightness in the work area
• With handy belt hook and bit case which can be fixed either on the right or left side

METABO 18V Brushless 1/2inch Impact Wrench Skin 602395890

• Compact cordless impact driver with 1/2"" male square and 300 Nm
• Unique Metabo brushless motor for quick work progress and highest efficiency for any application
• Automatic Power Shift (APS) supports working with self-tapping screws: automatic torque reduction after drilling to prevent overtightening.
• High torque machine with low kick-back torque
• Twelve speed/torque levels for a wide range of applications
• Integrated work light for illumination of the work area
• Robust die cast aluminium gear housing for optimum heat dissipation and durability
• Handy belt hook, can be fixed either on the right or left side
• Battery packs with capacity display for checking the charge status
• Ultra-M technology: highest performance

Specifications

• Max. screw size: M18
• Max. no-load speed: 0 - 2650 rpm
• Maximum impact rate: 3750 bpm
• Maximum torque: 300 Nm / 220 ft. lbs
• Max. loosening torque: 480 Nm / 355 ft. lbs
• Speed/torque levels: 12
• Bit retainer: Male square 1/2"" (12.70 mm)
• Vibration:
• Impact screwdriving: 7 m/s²
• Uncertainty of measurement K: 1.5 m/s²
• Noise emission:
• Sound pressure level: 95 dB(A)
• Sound power level (LwA): 106 dB(A)
• Uncertainty of measurement K: 3 dB(A)

METABO 18V 8.0Ah LIHD Battery Pack 625369000

• LiHD battery packs for ultimate performance and extremely long application with minimal temperature generation
• Ultra M technology: Intelligent battery management for long-lasting battery packs with a 3-year guarantee
• Patented “AIR COOLED“ charging technology
• Permanent Electronic Single Cell Protection (ESCP) when charging, for particularly long life.
• Processor-controlled charge and discharge management
• Capacity display with almost no self-discharge
• Capacity display with almost no self-discharge
• One battery pack for everything. 100% compatibility with all 18 V machines and chargers of the CAS partners: www.cordless-alliance-system.com

METABO 12-36V Air Cooled Battery Charger ASC55 627047000

• Monitored charging with microcontroller
• Battery diagnosis
• Charge time approximately 30 minutes at 1.5 Ah
• "AIR COOLED" function
• For charging all Li-Power Compact, Li-Power Plus, Li-Power Extreme battery packs
• For charging all Li-Ion and LiHD slide-on battery packs (12 V - 36 V) with adapted battery pack charging current
• Charger switches to compensation charge: to conserve the capacity, the battery pack is charged for 1 second every 45 seconds with 2.5 ampere.
• "AIR COOLED" function: the patented principle is based on air-cooling the battery pack during the charging process. The battery packs are gently cooled down to the required charging temperature, and then during the charging process are constantly maintained at optimum temperature. With this principle, a higher tool life of the battery packs and up to 30% shorter total charging time can be achieved.
• "AIR COOLED" function: the patented principle is based on air-cooling the battery pack during the charging process. The battery packs are gently cooled down to the required charging temperature, and then during the charging process are constantly maintained at optimum temperature. With this principle, a higher tool life of the battery packs and up to 30% shorter total charging time can be achieved.

Specifications

• Battery voltage: 12 - 36 V
• Mains voltage: 220 - 240 V
• Mains frequency: 50 - 60 Hz