KYORITSU 120A AC/DC Clamp Multimeter KYO2012RA

Capable of measuring AC and DC currents with OPEN CLAMP SENSOR 120A

• Cable strength increased with robust cable protection
• Test probe can be fixed to the holster
  
  • Can measure AC/DC current and voltage
• Pocket size and heavy duty design
  
  • Test lead cap to protect from short circuit accident
• The open jaws are thin, perfect to clamp wires even in tight spaces

Specifications

• DC V 600.0mV/6.000/60.00/600.0V
  
  • (Input impedance: Approx. 10MΩ)
  • ±1.0%rdg±3dgt
  • AC V 6.000/60.00/600.0V
  • (Input impedance: Approx. 10MΩ)
  • ±1.5%rdg±5dgt (45 to 400Hz)
  • DC A 60.00/120.0A
  • ±2.0%rdg±8dgt (60A)
  • ±2.0%rdg±5dgt (120A)
  • AC A 60.00/120.0A
  • ±2.0%rdg±5dgt (45 to 65Hz)
• Ω 600.0Ω/6.000/60.00/600.0kΩ/6.000/60.00MΩ
  
  • ±1.0%rdg±5dgt (600Ω/6/60/600kΩ)
  • ±2.0%rdg±5dgt (6MΩ)
  • ±3.0%rdg±5dgt (60MΩ)
  • Continuity buzzer Buzzer sounds below 35±25Ω
  • Diode test 2.000V
  • ±3.0%rdg±5dgt
  • Open circuit voltage: Approx. 2.7V
  • Capacitance 400.0nF/4.000/40.00µF
  • ±2.5%rdg±10dgt
  • ±1.0%rdg±5dgt (600Ω/6/60/600kΩ)
  • ±2.0%rdg±5dgt (6MΩ)
  • ±3.0%rdg±5dgt (60MΩ)
• Frequency (AC A) 99.99/400.0Hz
  
  • ±0.2%rdg±2dgt (100Hz)
  • ±0.1%rdg±1dgt (400Hz)
  • (AC V) 99.99/999.9Hz/9.999/99.99/300.0kHz
  • ±0.2%rdg±2dgt (100Hz)
  • ±0.1%rdg±1dgt (1000Hz/10/100/300.0kHz)
  • (Input sensitivity Current: more than 6A Voltage: more than 6V [to 10kHz]/more than 20V [10 to 300kHz])
  • Conductor size Ø12mm max.
• Applicable standards IEC 61010-1 CAT III 300V, CAT II 600V Pollution degree 2
  
  • IEC 61010-031, IEC 61010-2-032, IEC 61326-1, EN 50581(RoHS)
• Power source R03 (AAA)(1.5V) × 2
  
  • Continuous measuring time: DCV: approx. 150hours, ACA: Approx. 25hours (Auto power save: Approx. 15 minutes)