UNIMIG Viper 165 Multi-Process Welder PK11083

Includes

• 1 x UNIMIG U11006K VIPER MULTI165 3-in-1 Synergic MIG/TIG/STICK Welder
• 1 x UNIMIG U21032 Core Series Welding Helmet - Revenant
• 1 x UNIMIG MS.8B 0.8mm 5kg MIG Mild Steel Welding Wire
• 1 x UNIMIG UMWG8 Rogue™ Heavy Duty Welding Gloves
• 1 x UNIMIG UMSK15 27pce MIG Starter Kit to suit Binzel Style 15

UNIMIG U11006K VIPER MULTI165 3-in-1 Synergic MIG/TIG/STICK Welder

Lightweight and portable, the UNIMIG VIPER MULTI 165 is ready to go anywhere you need it. The clever Synergic MIG control takes the guesswork out of your settings. Simply select your wire size and wire type and adjust your amperage to suit your work piece. This 3 in 1 machine, lets you perform MIG, TIG and STICK welding all in one machine. There is no need to swap between machines, saving you time and setup.

Features

• MIG, TIG & STICK
• Welds:
  
  • Mild Steel
  • Stainless Steel
  • Cast Iron
  • Silicon Bronze
  • Aluminium
  • Copper
• 10AMP Domestic Plug
• Synergic Programs
• Geared Wire Drive
• Gas & Gasless MIG

Specifications

• Voltage: 240V
• Supply Plug: 10AMPS
• Rated Output: 30A/15.5V - 165A/22.3V
• Welding Current:
  
  • MIG: 30-165A
  • TIG: 20-160A
  • STICK: 20-140A
• No Load Voltage: 64
• Duty Cycle 40°C MIG: 10% @ 165A, 60% @ 68A, 100% @ 52A
• Duty Cycle 40°C TIG: 10% @ 160A, 60% @ 65A, 100% @ 50A
• Duty Cycle 40°C STICK: 10% @ 140A, 60% @ 58A, 100% @ 45A
• Dimensions (LxWxH): 513 x 206 x 391mm
• Weight: 9.8kg

Please note: In order to weld Aluminium, you will need to change your torch liner and use a spool gun. Refer to the manual for instructions.

UNIMIG U21032 Core Series Welding Helmet - Revenant

Keep your eyes and face protected during every weld with our Core Series welding helmets. The 98x48mm viewing lens means you get great visibility in every situation. The external grind button allows you to seamlessly switch to grind mode with ease. Four optimally positioned arc sensors trigger the lens, darkening it and keeping your eyes shielded from the start, even when you’re out of position.

Features

• 98mm x 48mm View Size: Get clear visibility in every situation. The 98x48mm viewing area lets you see every weld with complete clarity
• External Grind Button: Seamlessly switch to grind mode with the click of a button. When the helmet is in grind mode a small LED will illuminate, so you don’t need to take the helmet off to check
• 9-13 Shade Control: Keep your eyes protected no matter the weld type. With a 9 to 13 shade range, you’ll be covered while MIG, TIG or STICK welding, even when running as high as 500A
• 4 Arc Sensors: Detect every arc instantly. The four optimally positioned arc sensors trigger the lens, darkening it and keeping your eyes shielded from the start, even when you’re out of position
• Backup Battery: A CR2450 backup battery improves the performance and reliability of the auto-darkening filter
• 4 Point Harness: Get the perfect fit and stay comfortable for hours. Adjust all 4 points of contact to suit you, and have the weight spread more evenly, minimising neck strain
• EliteVision Lens Technology: See your weld clearly in true colour. EliteVision technology allows more colours from the spectrum to pass through the view, giving you better optical clarity and reducing eye fatigue

Specifications

• Filter Dimensions: 110mm x 90mm x 10mm
• View Size: 98mm x 48mm
• Arc Sensors: 4
• Classification: 1/1/1/2
• Light State: 4
• Dark State: 9-13
• UV/IR Protection: DIN15
• Time from Light to Dark: 0.1ms
• Time from Dark to Light: 0.1-0.9s
• Sensitivity Delay: Adjustable
• Power Supply: Solar Cells & CR2450 Replaceable Battery
• Operating Temperature: -5º–C to 55ºC
• Storage Temperature:-20ºC to 55ºC
• Shade Control: Yes
• Grind Mode: Yes (External)
• Minimum TIG Amperage: 10A
• Standards:
  
  • AS/NZS 1337.1 B (High Impact)
  • AS/NZS 1338.1 (Auto-Darkening)

UNIMIG MS.8B 0.8mm 5kg MIG Mild Steel Welding Wire

UNIMIG ER70S-6 is a high quality, copper coated, triple de-oxidised solid MIG welding wire supplied on 15kg / 5kg and 1Kg Plastic Spools. UNIMIG ER70S-6 is a mild steel welding wire that contains higher levels of manganese and silicon than other standard grades of MIG wire to produce high quality welds when used on dirty, oily, or rusty steel. The high silicon content increases the fluidity of the weld pool, thus creating a smoother bead appearance and resulting in minimal post-weld grinding. UNIMIG ER70S-6 wire is engineered to provide porosity-free, x-ray quality welds at the highest tensile strength (as welded) of all the plain carbon steel wires. ER70S-6 Solid MIG Wire requires a shielding gas: CO² and/or CO² mix. UNIMIG ER70S-6 wire is Precision Layer Wound for smooth uninterrupted wire feed with less liner and tip wear.

Applications

• Structural Steel – General Fabrication – Light Fabrication
• Transport Industry -Heavy Equipment – Farm Machinery
• Pressure Vessels – Robotic and Semi Automatic Welding Applications

Features

• High Quality
• Triple De-oxidised
• X-Ray Quality
• Precision Layer Wound
• Smooth Feeding
• Clean Weld Finish
• International Approvals
  
  • ER70S-6
  • AS/NZS 2717.1:ES6 – CG – W503H
• APPROVALS 5KG AND 15 KG SPOOLS
  
  • LLOYDS REGISTER
  • DET NORSKE VERITAS
  • AMERICAN BUREAU OF SHIPPING
  • GERMANISCHER LLOYD
  • CANADIAN WELDING BUREAU

Specifications

• Size: 0.8mm
• Weight: 5kg

UNIMIG UMWG8 Rogue™ Heavy Duty Welding Gloves

Please note: This product now comes in Black, your may recieve either blue or black gloves depending on stock availability.

The ROGUE™ Heavy Duty Welding Gloves are built for high heat and intensity MIG welding and plasma cutting. Made from heat and flame-resistant premium split cowhide and high-strength Kevlar stitching which adds durability and comfort when you need it most.

Features

• Premium cowhide leather
• Reinforced palm
• High-strength Kevlar
• 400mm length

Specifications

• Length: 400mm
• Gloves: Left & Right

UNIMIG UMSK15 27pce MIG Starter Kit to suit Binzel Style 15

The Binzel Style 15 Starter Kit contains all the essential consumables for a Binzel Style 15 Mig Torch & is conveniently packaged together in a sturdy carry case for storing alongside your machine! Other consumable starter kits are available for some of UNIMIG’s most popular MIG, TIG & Plasma torches.

Includes

• 1 x MIG Pliers (UMMP)
• 2 x Conical Nozzles (PGN15CON)
• 2 x Tip Holders (PCTH15)
• 2 x Nozzle Springs (PGNS15)
• 10 x 0.8mm Contact Tips (PCT0008-08)
• 10 x 0.9 Contact Tips (PCT0008-09)