SUTTON 8.0 x 45mm HSS-Cobalt Spot Weld Dril Bit - Pneumatic Disconnectors

SUTTON TOOLS® D205-Series Spot Weld Drills are designed for automotive vehicle body repairs. The can be used for quick and precise drilling through existing spot welds, releasing damaged panels and enabling replacements to be fitted.

These drills feature a spur point which is designed to cut through the weld while only leaving a slight mark on the second inner panel.

D205-Series Spot Weld Drills are specifically designed for use with pneumatic tools. They feaures a 60 taper on the shank which suits pneumatic spot weld disconnectors.

Features

• Centring Point - Enables accurate positioning and less drilling pressure without work hardening
• Shallow Point Design - Cuts through top panel while only slightly marking second panel
• Flatted Shank with60° Taper - For good location in the disconnector
• HSS-Cobalt Alloyed - The 8% cobalt formula improves abrasive & heat resistance, for increased strength at higher cutting temperatures

Specifications

• Diameter: 8.0 mm
• Working Length:
• Overall Length: 45 mm
• Shank: 8.0 mm Cylindrical with Flat Side
• Shank Taper: 60°

For use with

• Pneumatic Spot Weld Disconnectors