UNIMIG 10A Viper 135 Multiprocess MIG/TIG/STICK Welder Bundle PK11100

Includes

• 1 x UNIMIG Viper Multi 135 MIG/TIG/STICK Electric Welder U11005K
• 1 x UNIMIG Origin Series Welding Helmet - Black U21033
• 1 x UNIMIG Rogue Heavy Duty Welding Gloves U22010
• 1 x UNIMIG Suitable for use with Binzel MB15 MIG Torch Starter Kit UMSK15

UNIMIG Viper Multi 135 MIG/TIG/STICK Electric Welder U11005K

The ultimate DIY multi-process welder, the VIPER MULTI 135 is perfect for those weekend projects.

Synergic MIG controls for quick and easy weld setups
3-in-1 multi-process machine so you can MIG, TIG & STICK
10 amp plug, so you can use it with any domestic outlet

• SYNERGIC MIG CONTROL: The clever Synergic MIG control takes the guesswork out of your settings. Simply select your wire size and adjust the Synergic power knob to the thickness of your material. The program works with 0.6, 0.8 and 0.9mm mild steel, stainless steel & flux-cored wires.
• 10 AMP PLUG: Plug in and play. A 10 AMP power plug can be used on any domestic outlet. It’s perfect for the DIY home handyman or the professional welder looking for a machine that can be used almost anywhere.
• GAS & GASLESS MIG: This machine supports both gas-shielded MIG and gasless MIG wire, meaning you can easily run mild steel, stainless steel & flux-cored MIG wire.
• LIGHTWEIGHT & PORTABLE: Weighing just over 5kg, the VIPER MULTI 135 is ready to go anywhere you need it. Also included is a shoulder strap for extra comfort and portability.
• Multi-Process Welding: This three-in-one machine, lets you perform MIG, TIG and STICK welding all on one machine. There is no need to swap between machines, saving you time and setup.

Includes

• VIPER MULTI 135 MIG/TIG/STICK Welder
• 2m Direct Connect MIG Torch
• 2m Earth Clamp & Lead
• Electrode Holder
• 2m Gas Hose Complete with fittings
• 1kg E71T-GS 0.8mm Gasless Wire
• Operating Manual

Machine Specifications

• Primary input voltage: 240V Single Phase
• Supply plug: 10 AMP
• Rated input power (kVA): 4.15
• Ieff (A): 8.4
• Rated output: 40/16V-135A/21V
• No load voltage (V): 68
• Protection class: IP21S
• Insulation class: H
• Power factor: 0.68
• Minimum generator (kVA): 8.0
• Dinse connector: 10/25
• Standard: AS/NZ60974-1
• Suitable material: Mild Steel, Stainless Steel, Cast Iron, Silicon Bronze, Copper

Warranty

UNIMIG is pleased to offer a 2 year warranty on the VIPER MULTI 135*.

UNIMIG offers warranty across Australia with four UNIMIG service centre’s in Sydney, Melbourne, Brisbane & Perth. We also have authorised service centres across Australia as well.UNIMIG’s focus is to assure the buyer is getting reliability, performance and peace of mind with a quality product.

UNIMIG also offers an additional 6 months warranty free of charge when you register your product online via the UNIMIG website.

*Please note warranty only applies to the power source only

MIG Specifications

• MIG Welding current range: 40-135A
• MIG Duty cycle @ 40°C: 15% @ 135A, 60% @ 65A, 100% @ 50A
• MIG Wire size range: 0.6-0.9mm
• MIG Wire spool size: 1kg
• MIG Welding thickness range: 1-6mm

TIG Specifications

• TIG Function type: DC Lift Arc
• TIG Welding current range: 20-120A
• TIG Duty cycle @ 40°C: 15% @ 120A, 60% @ 60A, 100% @ 45A
• TIG Welding thickness range: 1-6mm

Stick Specifications

• Stick welding current range: 20-120A
• Stick Duty cycle @ 40°C: 15% @ 120A, 60% @ 60A, 100% @ 45A
• Stick Electrode range: 2.5-3.2mm
• Stick Welding thickness range: 1-6mm

Machine Features

• Wire Drive: Standard
• VRD: Yes
• Thermal overload protection: Over Temperature Warning

UNIMIG Origin Series Welding Helmet - Black U21033

The Origin Series Welding Helmet provides protection to your face and eyes from spatter and UV/IR radiation. Fitted with 2 arc sensors, it features 9-13 Shade control as well as GRIND mode for use when grinding. It is suitable for MIG, TIG and STICK welding, as well as plasma cutting.

• 2 ARC Sensors
• Grind Mode
• ELITEVISION Lens Technology
• 9-13 Shade Control

UNIMIG Rogue Heavy Duty Welding Gloves U22010

The Rogue Heavy Duty Welding Gloves are built for high heat and intensity MIG welding and plasma cutting. These gloves meet the EN 388 and EN 407 safety standards.

• Heavy-duty internal fleece lining
• Reinforced double layered palm and thumb
• Durable split cowhide leather

UNIMIG Suitable for use with Binzel MB15 MIG Torch Starter Kit UMSK15

Packaged in a sturdy carry case, consumable starter kits are now available to from UNIMIG. This kit is the perfect companion to be bundled alongside machines, which the kit containing all the essential consumables for a MB15 Style MIG Torch.

Includes

• 1 x MIG Pliers (UMMP)
• 2 x Conical Nozzles (PGN15CON)
• 2 x Tip Holders (PCTH15)
• 2 x Nozzle Springs (PGNS15)
• 10 x 0.8mm Contact Tips (PCT0008-08)
• 10 x 0.9 Contact Tips (PCT0008-09)
• 8.1 (Auto-Darkening)