MAKITA 18V Brushless 6 Piece 2 x 5.0AH Combo Kit DLX6137TX1

Includes

• 1 x MAKITA 18V Brushless Hammer Drill Driver Skin DHP486Z
• 1 x MAKITA 18V Brushless 4-Stage Impact Driver Skin DTD173Z
• 1 x MAKITA 18V Brushless Starlock Max Multi-Tool Skin DTM52ZX3
• 1 x MAKITA 18V Brushless SDS+ Rotary Hammer Skin DHR242Z
• 1 x MAKITA 18V Brushless 165mm Circular Saw Skin DHS680Z
• 1 x MAKITA 18V 22mm Reciprocating Saw Skin DJR189Z
• 2 x MAKITA 18V 5.0Ah Lithium-Ion Battery BL1850B-L
• 1 x MAKITA 18V Lithium-ion Dual-Port Rapid Battery Charger DC18RD 1969360
• 1 x MAKITA Canvas Tool Bag Suits LXT418 & LXT423 1999369

MAKITA 18V Brushless Hammer Drill Driver Skin DHP486Z

The 18V Brushless Hammer Driver Drill provides 141Nm of maximum fastening torque and no load speed of 2,100rpm combining rapid drilling speeds with high levels of torque. This model has been redesigned with a newly designed motor and gear ratio achieving not only more power but also increasing the performance in continuous heavy-duty applications.

Not only has the performance on this model been increased but it is also considerably shorter. At 178mm in length this model is 27mm shorter than the previous model. Making it the most compact drill in its class and extremely comfortable to use in all applications.

• Compact Design – for improved handling and control the overall length has been reduced by 27mm vs. the previous model
• 3 Drilling Modes – screwdriving mode (rotation with clutch) for achieving an even consistent finish when fastening screws. Drilling mode (rotation only) achieving 141Nm max. torque. Hammer Drilling mode (rotation with hammering) on the for drilling in masonry up to a maximum 16mm hole diameter.
• LED Joblight – high brightness twin LED joblight with pre-glow and after glow functions. Illuminating the working area for greater visibility during application
• High Power Output – This model has been redesigned with a newly designed motor and gear ratio achieving not only more power but also increasing the performance in continuous heavy-duty applications.
• 2 Speed Mechanical Gearing – high speed mode produces 2,100rpm for rapid drilling speed while low speed produces high levels of torque to suit high load operation.
• All metal gear construction – allow for smoothly transfer of power in high load applications. While the highly durable materials ensure this tool has unmatched durability, and will continue to perform in years to come.
• XPT – Extreme Protection Technology protects the tool against dust & moisture even in the harshest jobsite conditions, increasing durability

Specifications

• Max. drilling capacities in wood:
  
  • Auger bit: 50mm
  • Self-feeding bit: 76mm
  • Hole saw: 152mm
• Max. drilling capacities in steel: 13mm
• Max. drilling capacities in masonry: 16mm
• No load speed:
  
  • Hi: 0 - 2,100rpm
  • Lo: 0 - 550rpm
• Impact rate:
  
  • Hi: 0 - 31,500ipm
  • Lo: 0 - 8,250ipm
• Max. peak torque: 141Nm
• Max. tightening torque:
  
  • Hard: 130Nm
  • Soft: 65Nm

MAKITA 18V Brushless 4-Stage Impact Driver Skin DTD173Z

Experience precision, power, and control like never before with the Makita DTD173 Impact Driver. Featuring an innovative battery layout, this tool stands out by repositioning the center of gravity directly in line with the grip. The result Enhanced balance and stability for superior control in every application. With a maximum fastening torque of 180Nm, the DTD173 tackles heavy-duty tasks effortlessly, while its 4- stage speed selection and Assist mode variations provide optimal control for every job. At only 111mm in length, its compact design excels in tight spaces, and the quick switch button allows seamless one-handed mode adjustments for uninterrupted workflow. For added durability and precision, the enhanced bit holder minimizes wobble, ensuring accuracy when it matters most. Whether you're a professional tradesperson or a DIY enthusiast, the Makita DTD173 is engineered to deliver performance and reliability every time. Makita: Built for those who demand the best.

• Optimised battery layout, moves center of gravity in line with the grip for enhanced control
• Maximum fastening torque of 180Nm for heavy duty applications
• 4 stage speed selection & 4 Assist mode variations for optimised speed control
• Compact design at only 111mm in length for comfortable use in tight spaces
• Quick switch button for single handed mode selection
• Enhanced bit holder provides reduced bit wobble

Specifications

• No load speed
  
  • Max.: 0 - 3,600rpm
  • Hard: 0 - 3,200rpm
  • Med: 0 - 2,100rpm
  • Soft: 0 - 1,100rpm
• Impact rate
  
  • Max.: 0 - 3,800ipm
  • Hard: 0 - 3,600ipm
  • Med: 0 - 2,600ipm
  • Soft: 0 - 1,100ipm
• Max. tightening torque
  
  • Max.: 180Nm
  • Hard: 170Nm
  • Med: 50Nm
  • Soft: 20Nm
• Drive shank 6.35mm(1/4") Hex
• Overall length 111mm
• Skin weight 0.8kg
• Weight (with battery) 1.5kg (BL1860B)
• Voltage 18V

Includes

• Belt clip (346317-0)
• 266622-8 (Truss Head Screw)

MAKITA 18V Brushless Starlock Max Multi-Tool Skin DTM52ZX3

The Makita 18V LXT Brushless Multi Tool (DTM52) delivers more power and less vibration than ever before. The DTM52 is engineered with premium features like AVT for reduced vibration and lower noise. While the new STARLOCK Max accessory mount system provides improved performance, ideal for cutting, sanding, scraping, grout removal, and more.

The DTM52 delivers increased cutting efficiency with an improved oscillation angle of 3.6 engineered for faster, more aggressive cutting and sanding. The variable speed control dial (6,000 20,000 OPM) and soft start feature enable the user to match the speed to the application with more control.

The DTM52 is engineered for a range of applications including cutting, sanding, scraping, grout removal, and more. It is ideal for builders, carpenters, plumbers, wood floor installers, and general trades seeking a best in class cordless multi tool.

• Starlock accessory mounting system designed for heavy duty applications
• Anti Vibration Technology (AVT) with a counterbalance system significantly reducing vibration
• Increased cutting efficiency with improved oscillation angle of 3.6 for rapid cutting speeds
• Variable speed control dial for adjusting the speed to suit the application
• Tool less lever lock system allows for quick install and removal of accessories
• Includes a Bow Shape Plunge Cut Saw Blade

Specifications

• Oscillation angle,left/right: 1.8 Degrees (3.6 Degrees Total)
• Oscillation per/min: 10,000 - 20,000opm
• Vibration: 2.5 m/s²
• Noise: 69dB(A)
• Voltage: 18V
• Tool-less Accessory Change: Yes
• Starlock Compatible: Yes
• Starlock Max Compatible: Yes

MAKITA 18V Brushless SDS+ Rotary Hammer Skin DHR242Z

• 3 Mode operation: hammer only, rotation only, rotation & hammer
• Unique rubber joint suppresses vibration to battery
• 2.0j of impact energy

Specifications

• Impact Rate: 0 - 4,700ipm
• Vibration per min: 13.5m/s²

MAKITA 18V Brushless 165mm Circular Saw Skin DHS680Z

• Powerful Brushless DC motor (BLDC)
• Automatic Torque Drive; automatically increases motor torque according to load conditions
• Magnesium base with 45 and 50 degrees bevel cutting capacity
• Compact and lightweight design
• Rear dust exhaust port
• Twin LED job light with pre-glow
• LED indicator panel with 3 indicators for: Battery Fuel Gauge, Automatic Torque Drive and Overload Protection
• Tool hanger for hanging on a ladder or rafter
• Large lock off lever easily operated even with a gloved hand
• Compatible with 1.5, 3.0, 4.0 and 5.0Ah Lithium-Ion batteries

Specifications

• Voltage: 18V
• No Load Speed: 5,000rpm
• Bevel Capacity: 50º
• Blade Diameter: 165mm
• Max Cutting Capacities:
• 0º: 57mm
• 45º: 41mm
• 50º: 37mm
• Weight: 3.3kg
• Length: 350mm

MAKITA 18V 22mm Reciprocating Saw Skin DJR189Z

The LXT Advantage is comprised of four key components providing you with the most advanced and dependable 18V tools on the market. Fast-charging batteries, rapid optimum chargers, industry leading brushless motors, and STAR Protection computer controls make every tool in the world’s largest 18V range the best option for the job, no question.

The 18V brushless reciprocating saw (DJR189) has a lightweight and compact design to enhance workability in tight places. The DJR189 features a loop shaped handle to enhance housing rigidity, improve cutting efficiency, and minimise the chance of injury. The handle can be gripped one-handed and is positioned to allow firm transmission of force to the workpiece where it may be difficult to exert force on the blade such as in tight places.

The DJR189 is also fitted with a unique counterweight mechanism to reduce tool vibration meaning users experience lower fatigue. The DJR189 also comes standard with several other features, including electric brake for safety, LED job light to enhance visibility, eXtreme Protection Technology (XPT) for increased dust and water resistance, and a fixed type pivoting shoe plate. The DJR189 is the perfect solution where jobs require a lightweight and compact reciprocating saw.

• Compact design for increased maneuverability and single hand use
• Low vibration thanks to counterweight ensures comfortable prolonged use
• 22mm stroke length at 3,100spm produces rapid cutting speeds
• XPT technology – advanced protection against dust and moisture
• One touch tool-less blade clamp

Specifications

• Max. Cutting in Wood: 255mm
• Max. Cutting in Pipe: 130mm
• Length of Stroke: 22mm
• Strokes per Minute: 0 –3,100spm

MAKITA 18V 5.0Ah Lithium-Ion Battery BL1850B-L

• Integrated L.E.D. battery charge level indicator allows user to monitor battery charge
• Up to 33% more run time per charge compared to BL1830
• Fast 40 minute charging time
• Battery delivers consistent power and run time in extreme temperatures, even in winter (-20&degC)
• Impact-resistant outer case and shock-absorbing inner-liner are engineered to protect the battery
• Sixteen contact terminals maintain a constant connection with the tool to help prevent power loss or fluctuation, even during high-vibration applications
• Battery resists self-discharge and remains ready for use even after long periods of storage
• Sensitive electronics are protected with a thick gel coating, preventing damage against dust and moisture
• Star protection computer controls - includes overload protection, over-discharge protection and over heat protection
• The battery and tool communicate, protecting your tool and battery from overload by cutting power when put under abnormally high current draw
• If the battery reaches a certain level of heat it will cut power to the tool, protecting the tool and battery from overheating

MAKITA 18V Lithium-ion Dual-Port Rapid Battery Charger DC18RD 1969360

• Fast charging - charges 2 x 3.0Ah Lithium-Ion batteries at the same time in only 22 minutes
• Built-in CPU - gathers information from the battery's memory chip to determine optimum charging method
• Forced air cooling fan - cools the battery to minimise charging time
• LED charging display
• Full charge sound alert USB port provides 1.5A output for charging smart phones, tablets, etc

MAKITA Canvas Tool Bag Suits LXT418 & LXT423 1999369

• Ideal for transport & storage of your favourite Makita tools
• Weather Resistant
• Durable Nylon Cordura Construction
• Internal Pockets feature straps to retain tools during transit
• External pockets enable storage of accessories and more