MAKITA 18V Brushless 15 Piece 4 x 5.0AH Combo Kit DLX1514TX1

Includes

• 1 x MAKITA 18V Brushless Hammer Drill Driver Skin DHP486Z
• 1 x MAKITA 18V Brushless 4-Stage Impact Driver Skin DTD173Z
• 1 x MAKITA 18V Brushless 125mm Angle Grinder Skin DGA508Z
• 1 x MAKITA 18V Brushless SDS+ Rotary Hammer Skin DHR242Z
• 1 x MAKITA 18V Brushless 165mm Circular Saw Skin DHS680Z
• 1 x MAKITA 18V Brushless Reciprocating Saw Skin DJR187Z
• 1 x MAKITA 18V Brushless Starlock Max Multi-Tool Skin DTM52ZX3
• 1 x MAKITA 18V Brushless 1/2inch Mid-Torque Impact Wrench Skin DTW700Z
• 1 x MAKITA 18V 125mm Random Orbital Sander Skin DBO180Z
• 1 x MAKITA 18V Brushless Stick Vacuum Skin DCL283ZBX1
• 1 x MAKITA 18V Brushless D-Handle Jigsaw Skin DJV184Z
• 1 x MAKITA 18V Brushless AWS 82mm Planer Skin DKP181Z
• 1 x MAKITA 18V Blower Skin DUB185Z
• 1 x MAKITA 40V Max XGT Bluetooth Jobsite Radio Skin MR002GZ
• 1 x MAKITA 18V Long Distance Torch Skin DML812
• 4 x MAKITA 18V 5.0Ah Lithium-Ion Battery BL1850B-L
• 1 x MAKITA 18V Lithium-ion Dual-Port Rapid Battery Charger DC18RD 1969360
• 2 x MAKITA Canvas Tool Bag Suits LXT418 & LXT423 1999369

MAKITA 18V Brushless Hammer Drill Driver Skin DHP486Z

The 18V Brushless Hammer Driver Drill provides 141Nm of maximum fastening torque and no load speed of 2,100rpm combining rapid drilling speeds with high levels of torque. This model has been redesigned with a newly designed motor and gear ratio achieving not only more power but also increasing the performance in continuous heavy-duty applications.

Not only has the performance on this model been increased but it is also considerably shorter. At 178mm in length this model is 27mm shorter than the previous model. Making it the most compact drill in its class and extremely comfortable to use in all applications.

• Compact Design – for improved handling and control the overall length has been reduced by 27mm vs. the previous model
• 3 Drilling Modes – screwdriving mode (rotation with clutch) for achieving an even consistent finish when fastening screws. Drilling mode (rotation only) achieving 141Nm max. torque. Hammer Drilling mode (rotation with hammering) on the for drilling in masonry up to a maximum 16mm hole diameter.
• LED Joblight – high brightness twin LED joblight with pre-glow and after glow functions. Illuminating the working area for greater visibility during application
• High Power Output – This model has been redesigned with a newly designed motor and gear ratio achieving not only more power but also increasing the performance in continuous heavy-duty applications.
• 2 Speed Mechanical Gearing – high speed mode produces 2,100rpm for rapid drilling speed while low speed produces high levels of torque to suit high load operation.
• All metal gear construction – allow for smoothly transfer of power in high load applications. While the highly durable materials ensure this tool has unmatched durability, and will continue to perform in years to come.
• XPT – Extreme Protection Technology protects the tool against dust & moisture even in the harshest jobsite conditions, increasing durability

Specifications

• Max. drilling capacities in wood:
  
  • Auger bit: 50mm
  • Self-feeding bit: 76mm
  • Hole saw: 152mm
• Max. drilling capacities in steel: 13mm
• Max. drilling capacities in masonry: 16mm
• No load speed:
  
  • Hi: 0 - 2,100rpm
  • Lo: 0 - 550rpm
• Impact rate:
  
  • Hi: 0 - 31,500ipm
  • Lo: 0 - 8,250ipm
• Max. peak torque: 141Nm
• Max. tightening torque:
  
  • Hard: 130Nm
  • Soft: 65Nm

MAKITA 18V Brushless 4-Stage Impact Driver Skin DTD173Z

Experience precision, power, and control like never before with the Makita DTD173 Impact Driver. Featuring an innovative battery layout, this tool stands out by repositioning the center of gravity directly in line with the grip. The result Enhanced balance and stability for superior control in every application. With a maximum fastening torque of 180Nm, the DTD173 tackles heavy-duty tasks effortlessly, while its 4- stage speed selection and Assist mode variations provide optimal control for every job. At only 111mm in length, its compact design excels in tight spaces, and the quick switch button allows seamless one-handed mode adjustments for uninterrupted workflow. For added durability and precision, the enhanced bit holder minimizes wobble, ensuring accuracy when it matters most. Whether you're a professional tradesperson or a DIY enthusiast, the Makita DTD173 is engineered to deliver performance and reliability every time. Makita: Built for those who demand the best.

• Optimised battery layout, moves center of gravity in line with the grip for enhanced control
• Maximum fastening torque of 180Nm for heavy duty applications
• 4 stage speed selection & 4 Assist mode variations for optimised speed control
• Compact design at only 111mm in length for comfortable use in tight spaces
• Quick switch button for single handed mode selection
• Enhanced bit holder provides reduced bit wobble

Specifications

• No load speed
  
  • Max.: 0 - 3,600rpm
  • Hard: 0 - 3,200rpm
  • Med: 0 - 2,100rpm
  • Soft: 0 - 1,100rpm
• Impact rate
  
  • Max.: 0 - 3,800ipm
  • Hard: 0 - 3,600ipm
  • Med: 0 - 2,600ipm
  • Soft: 0 - 1,100ipm
• Max. tightening torque
  
  • Max.: 180Nm
  • Hard: 170Nm
  • Med: 50Nm
  • Soft: 20Nm
• Drive shank 6.35mm(1/4") Hex
• Overall length 111mm
• Skin weight 0.8kg
• Weight (with battery) 1.5kg (BL1860B)
• Voltage 18V

Includes

• Belt clip (346317-0)
• 266622-8 (Truss Head Screw)

MAKITA 18V Brushless 125mm Angle Grinder Skin DGA508Z

• BL Brushless Motor, provides more power and longer run times
• Electric brake, for increased safety and effeciency
• Kickback detection, detects sudden changes in wheel speed and shuts down motor
• Automatic Torque Drive, automatically slows rpm increasing torque to power through cuts
• Anti restart function
• Paddle switch design
• No Load Speed: 8,500rpm
• Overall Length: 362mm
• Wheel Size: 125mm

MAKITA 18V Brushless SDS+ Rotary Hammer Skin DHR242Z

• 3 Mode operation: hammer only, rotation only, rotation & hammer
• Unique rubber joint suppresses vibration to battery
• 2.0j of impact energy

Specifications

• Impact Rate: 0 - 4,700ipm
• Vibration per min: 13.5m/s²

MAKITA 18V Brushless 165mm Circular Saw Skin DHS680Z

• Powerful Brushless DC motor (BLDC)
• Automatic Torque Drive; automatically increases motor torque according to load conditions
• Magnesium base with 45 and 50 degrees bevel cutting capacity
• Compact and lightweight design
• Rear dust exhaust port
• Twin LED job light with pre-glow
• LED indicator panel with 3 indicators for: Battery Fuel Gauge, Automatic Torque Drive and Overload Protection
• Tool hanger for hanging on a ladder or rafter
• Large lock off lever easily operated even with a gloved hand
• Compatible with 1.5, 3.0, 4.0 and 5.0Ah Lithium-Ion batteries

Specifications

• Voltage: 18V
• No Load Speed: 5,000rpm
• Bevel Capacity: 50º
• Blade Diameter: 165mm
• Max Cutting Capacities:
• 0º: 57mm
• 45º: 41mm
• 50º: 37mm
• Weight: 3.3kg
• Length: 350mm

MAKITA 18V Brushless Reciprocating Saw Skin DJR187Z

• 32mm stroke with a cutting capacity of 255mm in wood
• Newly designed vertical crank mechanism reduces vibration
• High performance 3,000spm no-load speed
• Rafter hanging hook for added convenience
• XPT technology that protects against dust & moisture

Specifications

• Length of Stroke: 32mm
• Max. cutting capacities in pipe: ø 130mm
• Max. cutting capacities in wood: 255mm
• Overall Length: 439mm
• Strokes per minute
  • Hi: 0 - 3,000spm
  • Lo: 0 - 2,300spm
• Voltage 18V

MAKITA 18V Brushless Starlock Max Multi-Tool Skin DTM52ZX3

The Makita 18V LXT Brushless Multi Tool (DTM52) delivers more power and less vibration than ever before. The DTM52 is engineered with premium features like AVT for reduced vibration and lower noise. While the new STARLOCK Max accessory mount system provides improved performance, ideal for cutting, sanding, scraping, grout removal, and more.

The DTM52 delivers increased cutting efficiency with an improved oscillation angle of 3.6 engineered for faster, more aggressive cutting and sanding. The variable speed control dial (6,000 20,000 OPM) and soft start feature enable the user to match the speed to the application with more control.

The DTM52 is engineered for a range of applications including cutting, sanding, scraping, grout removal, and more. It is ideal for builders, carpenters, plumbers, wood floor installers, and general trades seeking a best in class cordless multi tool.

• Starlock accessory mounting system designed for heavy duty applications
• Anti Vibration Technology (AVT) with a counterbalance system significantly reducing vibration
• Increased cutting efficiency with improved oscillation angle of 3.6 for rapid cutting speeds
• Variable speed control dial for adjusting the speed to suit the application
• Tool less lever lock system allows for quick install and removal of accessories
• Includes a Bow Shape Plunge Cut Saw Blade

Specifications

• Oscillation angle,left/right: 1.8 Degrees (3.6 Degrees Total)
• Oscillation per/min: 10,000 - 20,000opm
• Vibration: 2.5 m/s²
• Noise: 69dB(A)
• Voltage: 18V
• Tool-less Accessory Change: Yes
• Starlock Compatible: Yes
• Starlock Max Compatible: Yes

MAKITA 18V Brushless 1/2inch Mid-Torque Impact Wrench Skin DTW700Z

The 18V Brushless 1/2” Impact Wrench is designed to suit the needs of manufacturing technicians, mechanics and fabricators. The DTW700 has an efficient Makita Brushless Motor, providing powerful torque in a compact design with 700Nm of maximum fastening torque and a powerful 1,000Nm of nut busting torque. The DTW700 features 4-stage power selection, increasing versatility and allowing the user to select the optimum rpm and fastening torque for the task at hand. It also features a forward and reverse automatic stop function, with 6 modes optimised for fastening applications, providing the user with more control during use.

• Compact design for comfortable handling at only 170mm in length
• 4 Stage power selection for optimum rpm and fastening torque
• Maximum nut busting torque of 1,000Nm with 700Nm max. fastening
• Unique rubber joint suppress vibration to battery terminals
• Forward & reverse auto stop function, optimised for fastening applications

Specifications

• Max. capacities standard bolt: M10-M24
• Max. capacities high tensile bolt: M10-M16
• No load speed:
• Max: 0-2,200rpm
• Hard: 0-1,900rpm
• Med: 0-1,200rpm
• Soft: 0-500rpm
• Impact rate:
• Max: 0-2,700ipm
• Hard: 0-2,400ipm
• Med: 0-1,700ipm
• Soft: 0-1,000ipm
• Max. fastening torque:
• Max: 700Nm
• Hard: 320Nm
• Med: 200Nm
• Soft: 150Nm
• Nut busting torque: 1,000Nm
• Drive shank: 12.7mm (1/2”) Square

MAKITA 18V 125mm Random Orbital Sander Skin DBO180Z

• Simple to operate electronic push button switch with 3-speed settings
• Connectable to dust extractor
• Compact design with short height and lower centre of gravity for better manoeuvrability
• 125mm Abrasive Paper Size

MAKITA 18V Brushless Stick Vacuum Skin DCL283ZBX1

The NEW 18V Brushless Stick Vacuum (DCL283ZBX1) features a simple to use trigger or lock on slide switch. The Brushless motor delivers a max sealed suction of 17.5kPa to power through tough applications while remaining lightweight at just 1.6kg with battery. The HEPA filter provides a high filtration rate of 99.97% and the translucent capsule has a 730mL capacity for easy disposal of collected dust and debris.

• Weighs only 1.6kg with battery for high efficiency and ease of use
• HEPA filter provides high filtration rate of 99.97%
• High performance 17.5kPa max sealed suction
• Easy operation with trigger or slide lock on switch
• 730mL Capsule collection capacity

Specifications

• Max. sealed suction: 17.5kPa
• Max. air volume: 1.1m³/min
• Capacity: 730mL
• Suction power: 90W

MAKITA 18V Brushless D-Handle Jigsaw Skin DJV184Z

4 key components make up our LXT Advantage, providing you with the most advanced, dependable 18V tools on the market. Our fast charging batteries, rapid optimum chargers, industry leading brushless motors and our STAR Protection computer controls make each and every one of the world's largest 18V range of tools the best option for the job, no question.

The Makita 18V LXT Brushless D Handle Jig Saw (DJV184) delivers fast and efficient cutting, with a compact design that’s engineered for ease of use and maneuverability. The DJV184 features a top handle design and is ideal for woodworkers, cabinet makers, builders, and general trades. The DJV184 has a compact and ergonomic design with less weight (only2.4kg. with 18V LXT 6.0Ah battery, sold separately). The efficient Makita built brushless motor is engineered for longer run time, increased power and speed, and longer tool life. The variable 5 speed control dial (0 3,000 SPM) enables the user to match the speed to the application, and the 3 orbital settings plus straight cutting provide added versatility. Convenience features include “tool less” blade changes, large 2 finger variable speed trigger with lock on button and a built in dust blower to clear the line of cut.

• Constant speed control maintains cutting speed under load
• Tool-less blade change for quick and convenient blade changes
• 3 orbital settings plus straight cutting deliver faster and more accurate cuts in a variety of materials
• Variable control dial enables user to match the speed to the application
• Soft No Load feature automatically reduces SPM for more accurate cutting starts

Specifications

• Max. cutting capacities in wood: 135mm
• Max. cutting capacities in steel: 10mm
• Max. cutting capacities in aluminium: 20mm
• Length of stroke: 23mm
• Strokes per minute: 0-3,000spm
• Bevel capacity: 45° left - 45° right

MAKITA 18V Brushless AWS 82mm Planer Skin DKP181Z

The DKP181Z delivers heavy duty cutting performance with a high powered Brushless Motor, allowing a massive 3mm max. cutting depth. Coupled with Automatic Torque Drive technology the planer automatically adjusts speed and torque depending on the load conditions for optimal cutting. Also featuring an electric brake and a foot on the base plate, increasing safety and protecting workpieces from any possible damage.

The DKP181Z features AWS*, enabling wireless connection to a compatible Bluetooth vacuum for on demand dust extraction, providing a cleaner and safer work environment.

• High powered motor allows maximum 3mm cutting depth
• Auto start Wireless System (AWS) for on demand dust extraction*
• 12,000rpm no load speed with Automatic Torque Drive performance
• Left or right side chip ejection
• Electric brake & foot on base plate protect workpiece from damage

Specifications

• Planing width: 82mm
• Max. planning depth: 3mm
• Shiplapping / rebate: 25mm
• Noise: 84db(A)
• Vibration: 5.0m/s²

*AWS receiver sold separately

MAKITA 18V Blower Skin DUB185Z

• Increased air volume with 3.2m³/min
• 3 stage air volume settings & variable speed trigger for maximum control
• Wind speeds of up to 352km/h for higher blowing efficiency
• Ultra-lightweight at just 2.1kg

Specifications

• Increased air volume with 3.2m³/min
• 3 stage air volume settings & variable speed trigger for maximum control
• Wind speeds of up to 352km/h for higher blowing efficiency
• Ultra-lightweight at just 2.1kg
• Specifications
• Max air volume: 3.2m³/min
• Max. Air Velocity: 352km/h
• No Load Speed: 0 - 18,000rpm
• Overall Length: 517mm
• Skin weight: 1.5kg
• Voltage: 18V

MAKITA 40V Max XGT Bluetooth Jobsite Radio Skin MR002GZ

The MR002G delivers great sound in a compact design, equipped with AM / FM radio and Bluetooth to wirelessly connect your mobile device to play music. It has one auxiliary port for MP3 compatibility, and delivers rich stereo sound from two powerful 89mm side-firing speakers.

The MR002G is engineered to stand up against harsh job site conditions with protective bumpers, and features dust and water resistant construction for increased durability.

• Audio Modes: AM & FM radio frequencies
• High quality sound with 2 large 89mm speakers
• Durable design with an IP65 rating protection against dust and water
• Powered by 40V Max, 18V, 12V Max or AC Power
• Runtime up to 53 hours

Specifications

• Continuous runtime: 40V Max 4.0Ah: 27.5hours | 18V 6.0Ah: 27.5hours
• Practical max. output: 40V Max: 5Wx2 | 18V: 3.5Wx2
• Frequency band: AM:520-1,710kHz / FM:87.5 –108MHz
• Bluetooth range: Max. 30m, Optimum 10m
• Voltage: 40V Max, 18V, 12V Max or AC Power

MAKITA 18V Long Distance Torch Skin DML812

The DML812 is designed to provide powerful illumination across large distances, capable of lighting up objects 640 metres away. It is powered by 18V batteries with high brightness neutral white LED’s providing a maximum 1,250lm. The DML812 features 4 output modes, allowing selection between spot light, flood light, spot/flood and strobe, providing varied lighting for varying purposes.

• Long beam distance lights up objects 640 metres away
• 4 output modes; spotlight, floodlight, spot/flood and strobe
• High brightness neutral white LED's provide a maximum 1,250lm
• Continuous runtime up to 7hours with a 5.0Ah in spotlight mode

Specifications

• Continuous runtime (6.0Ah):
  • Spot Light: 10hrs
  • Flood Light: 7.5hrs
  • Spot & Flood: 6.0hrs
• Luminous flux:
  • Spot Light: 600lm
  • Flood Light: 1,000lm
  • Spot & Flood: 1,250lm
• Illuminance (at 1m):
  • Spot Light: 71,000lx
  • Flood Light: 520lx
  • Spot & Flood: 51,000lx

MAKITA 18V 5.0Ah Lithium-Ion Battery BL1850B-L

• Integrated L.E.D. battery charge level indicator allows user to monitor battery charge
• Up to 33% more run time per charge compared to BL1830
• Fast 40 minute charging time
• Battery delivers consistent power and run time in extreme temperatures, even in winter (-20&degC)
• Impact-resistant outer case and shock-absorbing inner-liner are engineered to protect the battery
• Sixteen contact terminals maintain a constant connection with the tool to help prevent power loss or fluctuation, even during high-vibration applications
• Battery resists self-discharge and remains ready for use even after long periods of storage
• Sensitive electronics are protected with a thick gel coating, preventing damage against dust and moisture
• Star protection computer controls - includes overload protection, over-discharge protection and over heat protection
• The battery and tool communicate, protecting your tool and battery from overload by cutting power when put under abnormally high current draw
• If the battery reaches a certain level of heat it will cut power to the tool, protecting the tool and battery from overheating

MAKITA 18V Lithium-ion Dual-Port Rapid Battery Charger DC18RD 1969360

• Fast charging - charges 2 x 3.0Ah Lithium-Ion batteries at the same time in only 22 minutes
• Built-in CPU - gathers information from the battery's memory chip to determine optimum charging method
• Forced air cooling fan - cools the battery to minimise charging time
• LED charging display
• Full charge sound alert USB port provides 1.5A output for charging smart phones, tablets, etc

MAKITA Canvas Tool Bag Suits LXT418 & LXT423 1999369

• Ideal for transport & storage of your favourite Makita tools
• Weather Resistant
• Durable Nylon Cordura Construction
• Internal Pockets feature straps to retain tools during transit
• External pockets enable storage of accessories and more