FLUKE 1000V Industrial Multimeter FLU87V

The Fluke 87V Industrial Multimeter provides the resolution and accuracy to efficiently troubleshoot motor drives, plant automation, power distribution, and electromechanical equipment - even in loud, high-energy, and high-altitude locations. The 87V is designed so you can work more efficiently.

• Easy-access door for fast battery changes without breaking the calibration seal
• Analog bar graph for fast changing or unstable signals
• Large digit display with bright, two-level backlight for easier reading in low light
• Touch Hold keeps readings on display even after removing probes

The 87V lets you identify complex electrical problems fast. It supports accurate measurements on VFDs using a low-pass filter. The meter also captures intermittents as fast as 250 µS using Peak Capture. High-frequency, high-energy noise generated by large drive systems is blocked from your measurements with specially designed shielding.

It is built to the highest safety standards. All the inputs in the 87V are updated to the third edition of the EN 61010-1 to CAT III 1000 V and CAT IV 600 V. The meter is designed to withstand spikes of more than 8000 V. You also benefit from an audible Input Alert warning if the test leads are placed in the incorrect input jacks for the measurement being made.

The 87V has a removeable holster that also holds a test probe during testing for easier viewing. Relative mode lets you remove test lead resistance, improving accuracy of low-resistance measurements. To make your life even easier, the 87V fits into an optional magnetic hanger for easy set-up and viewing while freeing your hands for other tasks.

Specifications:

• Voltage DC: Maximum voltage - 1000V
• Voltage AC:Maximum Voltage - 1000V
• Current DC: Maximum Amps - 10A
• Current AC: Maximum Amp - 10A
• Resistance: Maximum Resistance - 50 MΩ
• Frequency: Maximum Frequency - 200 kHz
• Duty cycle: Maximum Duty Cycle- 99.9%
• Temperature Measurement: –200°C – 1090°C
• 80 BK Temperature Probe: –40°C – 260°C, 2.2°C or 2% whichever is greater
• Conductance: Maximum Conductance - 60.00 nS
• Diode Range: 3V
• Operating Temperature: –20°C to +55°C
• Storage Temperature: –40°C to +60°C
• Humidity (without condensation): 0% – 90% (0°C – 35°C) | 0% – 70% (35°C – 55°C)
• Operating Altitude: 2000M
• Overvoltage Category: EN 61010–1 to 1000 V CAT III, 600V CAT IV
• Agency approvals: CE, CSA, RCM
• Shock: 1 Meter drop per IEC 61010–1:2001
• Vibration: Per MIL–PRF–28800 for a Class 2 instrument

Includes:

• TL75 Test Leads (TL175 EUR)
• AC175 Alligator Clips
• Holster
• 9V Battery (Installed)
• 80BK Temperature Probe