FLUKE 1000V Remote Display True RMS AC/DC Clamp Meter w. Iflex FLU381

What Once Took Two People, Now Takes One

Now one technician can do jobs that would otherwise require two people. Clamp the Fluke 381 around a conductor, remove the display and walk across the room to operate controls or remove protective equipment, all while watching real-time readings.

The iFlex® Flexible Current Probe (included) expands the measurement range to 2500 A AC while providing increased display flexibility. With a cord that runs 6 feet, you can finally measure those tight spaces, awkward sized conductors and disorganized wires.

• Wireless technology allows the display to be carried up to 30 ft. away from the point of measurement for added flexibility without interference with measurement accuracy
• The removable magnetic display can be conveniently mounted where it is easily seen
• iFlex® Flexible Current Probe expands the measurement range to 2500 A AC
• CAT IV 600 V, CAT III 1000 V
• Integrated low pass filter and state-of-the-art signal processing allows for use in noisy electrical environments while providing stable readings
• Proprietary inrush measurement technology to filter out noise and capture motor starting current exactly as the circuit protection sees it
• Ergonomic design fits in your hand and can be used while wearing protective equipment
• Radio transmitter automatically sets the correct measurement range so you do not need to change the switch positions while taking a measurement
• Soft carrying case
• Safety Conformance: IEC/EN 61010-1:2001, 1000V CAT III, 600V CAT IV

Specifications:

• AC Current via Jaw: Range: 999.9 A | Resolution: 0.1 A | Accuracy: 2% ± 5 digits (10-100 Hz), 5% ± 5 digits (100-500 Hz) | Crest Factor (50/60 Hz): 3 @ 500 A, 2.5 @ 600 A, 1.42 @ 1000 A, Add 2% for C.F. > 2
• AC Current via Flexible Current Probe: Range: 999.9 A / 2500 A (45 Hz – 500 Hz) | Resolution: 0.1 A / 1 A | Accuracy: 3% ± 5 digits | Crest Factor (50/60 Hz): 3.0 at 1100 A, 2.5 at 1400 A, 1.42 at 2500 A, Add 2% for C.F. > 2
• DC Current: Range:  999.9 A | Resolution: 0.1 A | Accuracy: 2% ± 5 digits
• AC Voltage: Range: 600 V /1000 V | Resolution: 0.1 V / 1 V | Accuracy: 1.5% ± 5 digits (20 – 500 Hz)
• DC Voltage: Range: 600.0 V /1000 V | Resolution: 0.1 V / 1 V | Accuracy: 1% ± 5 digits
• Frequency – Via Jaw: Range: 5.0 – 500.0 Hz | Resolution: 0.1 Hz | Accuracy: 0.5% ± 5 digits | Trigger Level: 5 – 10 Hz, ≥ 10 A, 10 – 100 Hz, ≥ 5 A, 100 – 500 Hz, ≥ 10 A
• Frequency via Flexible Current Probe: Range: 5.0 to 500.0 Hz | Resolution: 0.1 Hz | Accuracy: 0.5% ± 5 digits | Trigger Level: 5 to 20 Hz, ≥ 25 A, 20 to 100 Hz, ≥ 20 A, 100 to 500 Hz, ≥ 25 A
• Resistance: Range: 600 Ω/6 kΩ/60 kΩ | Resolution: 0.1 Ω/1 Ω/10 Ω | Accuracy: 1% ± 5 digits
• Jaw Opening: 34 mm
• Flexible Current Probe Diameter: 7.5 mm
• Flexible Current Probe Cable Length (head to electronics connector): 1.8 m
• Operating Temperature: -10°C to +50°C
• Storage Temperature: -40°C to +60°C
• Operating Humidity: Non condensing (< 10°C), ≤ 90% RH (at 10°C to 30°C), ≤ 75% RH (at 30°C to 40°C), ≤ 45% RH (at 40°C to 50°C) (Without Condensation)
• Operating Altitude: 2,000 meters
• Storage Altitude: 12,000 meters
• EMI, RFI, EMC, RF: EN 61326-1:2006, EN 61326-2-2:2006, ETSI EN 300 328 V1.7.1:2006, ETSI EN 300 489 V1.8.1:2008, FCC Part 15 Subpart C Sections 15.207, 15.209, 15.249, FCCID: T68-F381, RSS-210 IC: 6627A-F381
• Temperature Coefficients: Add 0.1 x specified accuracy for each degree C above 28°C or below 18°C
• Wireless Frequency: 2.4 GHz ISM Band 10 meter range
• Safety Compliance: ANSI/ISA S82.02.01:2004, CAN/CSA-C22.2 No. 61010-1-04, IEC/EN 61010-1:2001 to 1000V CAT III, 600V CAT IV.
• Double Insulation Clearance: Per IEC 61010-2-032
• Double Insulation Creepage: Per IEC 61010-1
• Agency Approvals